Approvals/Certification
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories
Blog
News
Products
Uncategorized

Flexible Hoses

ENGINEERING SPECIFICATIONS

Flexible metal braided connector assemblies can be used on pumps, equipment and coil connections as indicated in the specifications, drawings and equipment schedules.Flexible metal braided connectors can also be used where flexible connectors are specified on equipment that will operate at temperatures above 210°F.Flexible metal braided connectors must be installed in a straight line without offsets or twists. Support pipe without any load on flexible connectors.Connectors for pipe sizes up to 2″ I.D. will have threaded ends, and connectors for pipe sizes 2-1/2″ I.D. or larger will be flanged. Connectors for copper piping will have female copper lube ends.Utilize connectors of 300 Series stainless steel corrugated hose and braid and carbon steel Male NPT or 150# flange end fittings for connection to steel piping. Female connectors to be installed on copper piping should be constructed of bronze hose and braid with copper end connections. Stainless steel and bronze flexible connectors shall meet the Buy American Act.

TERMS & CONDITIONS OF SALE

MINIMUM INVOICE CHARGES: $100 net for any single order.

SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7,500 and over, for shipment at one time to one destination into distributor stock, as determined by GroovJoint within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.Shipping and handling charges on orders less than net price value of $7,500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination

WARRANTY

This warranty applies only to parts which are manufactured and delivered by GroovJoint. We warrant all products to be free from defects in materials and workmanship under normal conditions of use and Flanged End, Grooved End & Threaded End Metal Braided Flexible Connectors service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one (1) year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.

The conditions of the warranty are as follows:

All parts manufactured and delivered by GroovJoint will be free from defects in material or workmanship under normal use and service for a period of one year. In the event of failure of a part due to such a covered defect, GroovJoint will repair or replace the defective part in its facilities. The part must be returned to the factory by and at the expense of the person claiming the benefit of the warranty. GroovJoint is the only entity authorized to do any warranty repairs.

This warranty is expressed in lieu of all other warranties, expressed or implied. This includes the implied warranty of suitability for a particular purpose, and of all other obligations or liabilities on the part of GroovJoint.
Furthermore, it neither assumes nor authorizes any other persons to assume for GroovJoint any other liabilities in connection with the sale of products.

This warranty does not cover components of products made by others or any part thereof, which have been repaired or altered, except by GroovJoint. This includes, but is not limited to, those parts that have been subjected to misuse, negligence, or accident.

GroovJoint will not be held liable for damages or delay suffered by the purchaser regardless of whether such damages are general, special, or consequential in nature, or whether caused by defective material, workmanship
or otherwise whether caused by GroovJoint negligence regardless of degree.

Because we do not supervise or control the installation and use of our products, GroovJoint cannot be responsible for their performance or for the improper application and/or usage. GroovJoint neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.

This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of GroovJoint’s factory or which has been used in a manner contrary to GroovJoint’s instructions or recommendations. GroovJoint shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

Effective October 1, 2014.

PRODUCT SPECIFICATIONS

General

  1. Provide flexible hose connector(s) as indicated on the contract drawings or as required to accommodate any thermal expansion, contraction or seismic movement of the piping system
  2. Flexible hose connectors shall be capable of compensating for lateral movement and vibration
  3. Flexible hose connectors shall be manufactured complete with section of corrugated metal house, compatible braid, with inlet and outlet connections as required
  4. For flammable liquid or gas service up to 4″, flexible hose connector shall be CSA / AGA certified

Products

  1. Flexible hose connectors to be manufactured by GroovJoint
  2. Corrugated Hose
    1. Stainless Steel
    2. Type 304
    3. Type 321
    4. Type 316
    5. 2.1.1 Bronze
  3. Braid
    1. 304 Stainless Steel braid shall be used for any series 300 stainless steel hose
    2. Bronze braid shall be used for any bronze hose
  4. Fittings Materials of construction and end fitting type shall be consistent with pipe material and equipment/pipe connection fittings; copper fittings shall not be attached to stainless steel hose

Pressure Rating

  1. Flexible Hose Connector with Stainless Steel Hose
  2. Size

    (Inches)

    Working Pressure at 70°F

    Single Braid (PSI)

    Working Pressure at 70°F

    Double Braid (PSI)

    1/2″

    1100

    1525

    3/4″

    792

    1267

    1″

    571

    914

    1-1/4″

    531

    850

    1-1/2″

    472

    755

    2″

    500

    750

    2-1/2″

    387

    600

    3″

    288

    431

    4″

    232

    371

    5″

    200

    245

    6″

    170

    300

    8″

    212

    260

    10″

    175

    220

    12″

    160

    220

    Pressure Rating

    1. Flexible Hose Connector with Bronze Hose
    2. Size

      (Inches)

      Working Pressure at 70°F

      Single Braid (PSI)

      Working Pressure at 70°F

      Double Braid (PSI)

      1/2″

      566

      753

      3/4″

      468

      622

      1″

      334

      444

      1-1/4″

      306

      407

      1-1/2″

      297

      395

      2″

      210

      279

      2-1/2″

      194

      258

      3″

      166

      221

      4″

      109

      175

      Execution

      1. Install flexible hose connectors where indicated on contract documents
      2. Install and guide per manufacturers’ installation instructions and Mechanical Contractors Association of America “Guidelines for Quality Piping Installations”

Flanged End, Grooved End & Threaded End Metal Braided Flexible Connectors Product Line

Flexible Connectors are manufactured in both 304L and 316L grades. Ends can be flanged, grooved, or threaded to meet the customer’s needs. Size ranges include 1″ – 10″ in diameter for flanged and grooved.

Size ranges for threaded ends range from 1/2″ – 2″.

Pressure / Temperature

size Pressure @ 70º F
Working
PSI
Test
PSI
2 455 683
2-1/2 345 518
3 290 435
4 250 375
5 200 300
6 210 315
8 190 285
10 150 225

Pressure / Temperature

Pressure Factors for Above 70ºF*
º F Factor º F Factor
100 0.99 450 0.81
150 0.96 500 0.79
200 0.94 550 0.76
250 0.92 600 0.74
300 0.89 650 0.72
350 0.86 800 0.66
400 0.84 1000 0.6

Pressure / Temperature

Size

Pressure @ 70º F

Working

PSI

Test

PSI

1/2

1040

1560

3/4

600

900

1

580

870

1-1/4

450

675

1-1/2

410

615

2

450

675

Pressure Factors for Above 70ºF*

º F

Factor

º F

Factor

100

0.99

450

0.81

150

0.96

500

0.79

200

0.94

550

0.76

250

0.92

600

0.74

300

0.89

650

0.72

350

0.86

800

0.66

400

0.84

1000

0.60

*Multiply working pressure by pressure factor for temperature adjusted pressure rating.

Dimensions (inches)

Size

ØC

ØD

L1

L2

ØBC

ØBH

N

T

2

6.0

2.44

9

5.78

4.75

0.75

4

0.62

2-1/2

7.0

2.94

9

5.78

5.50

0.75

4

0.62

3

7.5

3.57

9

5.78

6.00

0.75

4

0.62

4

9.0

4.57

9

5.39

7.50

0.75

8

0.62

5

10.0

5.66

11

7.14

8.50

0.87

8

0.75

6

11.0

6.72

11

6.74

9.50

0.87

8

0.75

8

13.5

8.72

12

7.24

11.75

0.87

8

1.00

10

16.0

10.88

13

7.85

14.25

1.00

12

1.00

Size

Maximum

Maximum

Maximum

Maximum

Axial

Axial

Transverse

Angular

Compression

Elongation

Movement

Deflection

2

0.16″

0.16″

± 0.12″

1.5º

2-1/2

0.16″

0.16″

± 0.12″

1.5º

3

0.16″

0.16″

± 0.12″

1.5º

4

0.16″

0.16″

± 0.12″

1.5º

5

0.20″

0.20″

± 0.16″

6

0.20″

0.20″

± 0.16″

8

0.20″

0.20″

± 0.16″

10

0.20″

0.20″

± 0.16″

Standard Materials

Ref No. Description Material

1

Hose Braid

304 Stainless Steel

2

Corrugated Hose

321 Stainless Steel

3

Braid Band

304 Stainless Steel

4

Flange

304 or 316 Stainless Steel

Dimensions (inches)

Size ØC (NPT) ØD L1 L2 L3

1/2

1/2 – 14

0.55

6.5

2.56

1.18

3/4

3/4 – 14

0.75

7.0

2.67

1.38

1

1 – 11.5

0.95

8.0

3.28

1.58

1-1/4

1-1/4 – 11.5

1.26

8.5

3.38

1.77

1-1/2

1-1/2 – 11.5

1.50

9.0

3.49

1.97

2

2 – 11.5

1.97

10.5

4.99

1.97

Standard Materials

Ref No. Description Material

1

Hose Braid

304 Stainless Steel

2

Corrugated Hose

321 Stainless Steel

3

Braid Band

304 Stainless Steel

4

Male Pipe Thread

304 or 316 Stainless Steel

Braid Limits

Braid Limits

Size

Maximum Axial Compression

Maximum Axial Elongation

Maximum Transverse Movement

Maximum Angular Deflection

1/2

0.12″

0.12″

± 0.08″

2/4

0.12″

0.12″

± 0.08″

1

0.12″

0.12″

± 0.08″

1-1/4

0.12″

0.12″

± 0.08″

1.5º

1-1/2

0.12″

0.12″

± 0.08″

1.5º

2

0.16″

0.16″

± 0.12″

1.5º

Dimensions (inches)

Size

ØC

ØD

L1

L2

ØBC

ØBH

N

T

2

6.0

2.44

9

5.78

4.75

0.75

4

0.62

2-1/2

7.0

2.94

9

5.78

5.50

0.75

4

0.62

3

7.5

3.57

9

5.78

6.00

0.75

4

0.62

4

9.0

4.57

9

5.39

7.50

0.75

8

0.62

5

10.0

5.66

11

7.14

8.50

0.87

8

0.75

6

11.0

6.72

11

6.74

9.50

0.87

8

0.75

8

13.5

8.72

12

7.24

11.75

0.87

8

1.00

10

16.0

10.88

13

7.85

14.25

1.00

12

1.00

Size

Maximum Axial Compression

Maximum Axial Elongation

Maximum Transverse Movement

Maximum Angular Deflection

2

0.16″

0.16″

± 0.12″

1.5º

2-1/2

0.16″

0.16″

± 0.12″

1.5º

3

0.16″

0.16″

± 0.12″

1.5º

4

0.16″

0.16″

± 0.12″

1.5º

5

0.20″

0.20″

± 0.16″

6

0.20″

0.20″

± 0.16″

8

0.20″

0.20″

± 0.16″

10

0.20″

0.20″

± 0.16″

Standard Materials

Ref No. Description Material

1

Hose Braid

304 Stainless Steel

2

Corrugated Hose

321 Stainless Steel

3

Braid Band

304 Stainless Steel

4

Flange

304 or 316 Stainless Steel

© Copyright 2017 Groovjoint. All rights reserved. | Design & Hosting By Media Search Group